DIY Inclusions and Exclusions

Pricing Information

All House Pack Only prices stated on our website are for the components of the EasyBuild House Pack and its included materials only. These prices do not include the on-site construction of the home, or take into account any site specific costs that you may incur.

All prices displayed are based on our Standard House Pack, built on concrete slab foundations with Duragroove primary cladding and Nuline Plus weatherboard features.

Alternative cladding variations, timber floor packs (for sites requiring timber pile foundations), seaspray zone requirements or other amendments may incur additional costs. The price excludes materials for decking and verandahs, which are an optional extra. Please note that to meet Code Compliance standards, houses on timber pile foundations may be required to have decking or suitable steps outside all external doors. All prices stated exclude GST and are subject to change.

DIY Inclusions

Detailed below is what’s included in each of our House Packs. Talk to us for more information about your specific new home build.

Download a printable version of our DIY Inclusions and Exclusions.

Customised set of plans including site specific setout, site information and preparation of your building consent documentation. The fee charged by your local Building Consent Authority for assessing your application is not included.

Comprehensive step-by-step instruction guide on building an EasyBuild home, along with specific layout plans for stages of construction.

All required hardware for construction of components within the EasyBuild House Pack.

  • All joists, beams and dwangs cut to length, and treated.
  • Brackets and related hardware.
  • Particleboard flooring sheets and glue.

Brackets, packers and required hardware.

Pre-cut structural and internal framing. All timber is treated to the required standards for each purpose.

  • Expol underfloor insulation 60mm R1.4, for houses on pile foundations only.
  • Wall insulation 90mm R2.8, pre-installed in exterior panels.
  • Knauf skillion ceiling insulation 105mm R3.2.

Pre-built exterior panels, fully lined and insulated with pre-installed windows and external doors. Exterior panels include a rigid air barrier and materials for a ventilated cavity are provided, making your home stronger and more resistant to water ingress. Conduits in the panels allow for easy wiring.

  • Fletcher SmartFit Windows, pre-installed into exterior panels. 
  • Fletcher SmartFit Doors, pre-installed into exterior panels.
  • Fletcher SmartFit Sliding Doors.
  • Pre-installed aluminium front door. Available in Matte Grey Friars or Matte Sandstone Grey.
  • Palladium Silver joinery for windows, doors and sliding doors.

Triboard ceiling sheets.

Roof ventilation material to be installed along each purlin, allowing increased airflow within the roof cavity, and further protecting your home from moisture.

Colorsteel Endura pre-painted corrugated roofing, including ridge flashing, barge flashings and fixings. Available in Grey Friars or Sandstone Grey.

Marley Classic white spouting and downpipes.

Fibrous cement sheet soffit and jointers.

  • Duragroove Smooth.
  • Nuline Plus weatherboard.
  • Palliside pre-finished bevel back weatherboard. Available in White, Riverstone or Slate, in traditional finish.
  • Pre-primed pine bevel back weatherboard.
  • 70 Series Austral Classic Brick Veneer (for houses on concrete slab foundations only).

Treated timber cavity battens, allowing an extra layer of protection between your exterior panels and weatherboard, further protecting your home from moisture.

  • GIB Standard plasterboard for internal wall linings.
  • GIB Aqualine for wet areas, including kitchen and bathrooms.
  • Bevelled 60mm skirting, bevelled 40mm scotia, bevelled 40mm architraves to windows, bevelled 60mm architraves to interior door frames.
  • Split jamb pre-hung doors.
  • Flat jamb sliding wardrobe doors.
  • Split jamb pre-hung wardrobe doors (selected bedrooms only).
  • All door handles and catches, including passage and privacy sets (Schlage Rubens Satin Chrome) and door stops.

Kitchen, including benchtop, single bowl stainless steel sink insert with draining board and pre-finished cabinets in 16mm melamine on moisture resistant particleboard substrate, colour Bestwood Arctic White Embossed. Benchtop 37mm laminate HPL in colour Black Alicante or Silver Sand Mist Pearl.

  • Aquatica Saluto Chrome gooseneck kitchen mixer tap.
  • Fisher & Paykel stainless steel under bench oven – OB60SC5CEX1.
  • Fisher & Paykel ceramic cooktop – CE604CBX2.
  • Fisher & Paykel stainless steel dishwasher – DW60FC2X1.
  • Fisher & Paykel stainless steel ducted canopy rangehood – HC60PLX4.
  • Titan 760 waste disposal with airswitch.
  • Aquatica Saluto Chrome basin mixer tap.
  • Chrome sink waste.
  • Aquatica Saluto Chrome shower mixer.
  • Aquatica Saluto single spray slide handshower set.
  • Milford 1000mm shower system with tray, easy clean waste and 2 or 3 sided liner. Please note some models are restricted to a Milford 900mm shower system.
  • Gemelli acrylic bath, with Aquatica Kudos chrome bath spout, chrome mixer, and chrome bath waste (if applicable).
  • Aquatica 900mm Maximo floor mounted vanity, 460mm deep, white.
  • Aquatica Azure back to wall toilet, rimless with soft close seat.
  • Aquatica Lania toilet roll holder.
  • Aquatica Lania towel rail.
  • 900mm x 900mm mirror.
  • Aquatica Saluto chrome basin mixer tap.
  • Aquatica chrome sink waste.
  • Aquatica Saluto Chrome shower mixer.
  • Aquatica Saluto single spray slide handshower set.
  • Milford 1000mm shower system with tray, easy clean waste and 3 sided liner.
  • Aquatica 750mm floor standing vanity, 350mm deep, white.
  • Aquatica Azure back to wall toilet, rimless with soft close seat.
  • Aquatica Lania toilet roll holder.
  • Aquatica Lania towel rail.
  • 900mm x 750mm mirror.

Hose tap.

Aquatica LaundraCentro Laundry Tub (if applicable); Hubtub Slim Laundry Tub (Tekapo and Cambridge designs only); or pair of laundry taps.

Rheem 180l hot water cylinder (except Oxford).

  • Melamine shelf and Lumberlok Closet Rail for wardrobes.
  • Pine slatted shelving for linen cupboard.

Please Note: Our inclusions are based on current product availability and are subject to change. In the event where a product specified above is not available at the time of purchase, an equivalent alternative product may be provided.

DIY Exclusions

Please note, these items are excluded from the pack price only. For details on what’s included in our Full Build pricing, see our Full Build Inclusions

If you’re interested in a Full Build, talk to your EasyBuild Preferred Builder or Contact Us for a comprehensive quote that takes your site requirements and chosen specifications into consideration.

For all DIY projects, read on.

Cost of delivery to your specific site. We have set delivery costs to the North and South Islands at $2,600 and $3,600 respectively, however deliveries to remote or difficult to reach areas or where the building site is difficult to access may incur additional costs.

Your local Building Consent Authority needs to check the proposed foundations and house for your specific site. Because all EasyBuild designs have MultiProof approval from the Ministry of Business, Innovation and Employment, getting consent from your local authority is simpler, faster and costs less.

These costs are specific to your site. To understand how much you should allow for in-ground services such as drainage, power, gas and telecommunications, you need to determine the location of the services required for your home in relation to the site boundary and work area.

Materials to build the foundations of your house may vary depending on the slope of your individual site and the foundation type chosen. We recommend that all customers engage a professional to build their foundations. Houses built on timber pile foundations have a timber floor pack included in their House Pack.

Our houses can be completed as a Full Build project by your local Preferred Builder, by professional builders in your region, semi-skilled workers or as a DIY project

 There are certain parts of construction that we recommend are always completed by professional builders or tradespeople, including foundations, cladding, roofing, Gib-stopping and all plumbing and electrical work

Electrical wiring and plumbing pipes are not provided, to allow for customer input into locations and site specific requirements.

To allow for easy wiring and plumbing, all of our House Packs have conduits installed in the exterior walls in certain locations.

Paint supply for the interior and exterior of your house.

Floor coverings are not included in the EasyBuild House Pack to allow customers to customise their own flooring. Water-resistant flooring such as vinyl flooring or tiling is required in all wet areas for your Code Compliance Certificate.

Window coverings are not included in the EasyBuild House Pack price to allow customers to customise their own curtains and blinds.

Light fittings are not included in the EasyBuild House Pack price to allow customers to customise their own lighting.